One Minute Preparation
EasyDECON® solution can be fully mixed in about a minute. Each pail kit comes with a handy mixing pail, one pre-measured liquid bladder of Penetrator (Part 1), one pre-measured liquid bladder of Fortifier, (Part 2) and a pre-measured plastic bottle of Fortifier Booster, (Part 3).

Easy Application
EasyDECON® can be used as a foam, fog, and spray. Fogging application has the benefit of providing thorough coverage, by dispersing particulates around every square inch of an area disinfecting the air and ALL surrounding hard to reach surfaces such as walls, fixtures, ceilings, et.  Foam application has the benefit of providing an easy visual reference for application coverage, and allows the formulation to adhere to surfaces to maintain the required contact time. Spray application has the benefit of deeply soaking contaminated surface areas for prolonged protective benefits on porous surfaces.

Easy Clean Up
Because EasyDECON® is non-toxic and environmentally benign, clean up is simple using a vacuum, water, rags and mops to rinse away the residue.

Why EasyDECON®
Methods of disinfection currently utilized (vacuuming, surface wiping, hand washing, abatement et..) are not effective enough and cannot be used to diffuse and apply disinfectant products in the atmosphere and on all surfaces (including system devices, equipment, furnishings and structural components). As a result, mold and infectious agents can quickly re-contaminate the area. With these issues in mind, EasyDECON® has been employed as a fog to ensure the perfect and even diffusion of the disinfectant throughout the area and on all the surfaces treated - including those which are normally inaccessible or hidden. EasyDECON® is the answer to the ’missing link’ in the disinfection chain. It can be included as a natural stage in the general hygiene process, to reduce the concentration of contamination to undetectable levels.